Bates Webbers with Luxe Leather Single Strap Stirrup Leathers Brown/Black 60-80

Bates Luxe Leather Webbers are revolutionary stirrup straps made without buckles to reduce the lump under your thigh and provide closer contact to your horse.

The single thickness under the leg removes excess bulk and interference, facilitating the accurate delivery of leg aids.

Made in luxurious leather to match your Bates Saddle, with a webbing core to ensure they will not stretch and cause unevenness.

Luxe Leather is hand-selected from the finest calf-skin leather in the world and meticulously cared for throughout its specialised tanning process.

This will guarantee exceptional performance in strength, richness of colour, ultra-soft feel and level of grip to meet the unique demands of an equestrian saddle.

Your new saddle will feel exceptionally grippy, luxurious and succulent from day one, providing you with the ultimate in comfort and prestige.

Available in Black or Classic Dark Brown in:

60cm (Kids / Ladies Jump/ Small Ladies)

70cm (Ladies Dressage / Mens Jump)

80cm (Tall Mens Dressage)

Size Guide

• 60 cm (shortest hole 38 cm to longest hole 53 cm). This size is most similar to 122 cm stirrup straps.
• 70 cm (shortest hole 48 cm to longest hole 63 cm). This size is most similar to 140 cm stirrup straps.
• 80 cm (shortest hole 58 cm to longest hole 74 cm) This size is most similar to 160 cm stirrup straps.

Webbers are measured laying straight out flat from end to end. To ensure a good fit measure your current leathers at the correct legnth whilst on your saddle from the stirrup bar to the eye of the stirrup. You will then need to add 20cm to allow the webber to loop through the eye of the stirrup & hook back on to itself. For correct length & to ensure there in no damage to your saddle you ideally need the t-bar to sit below your saddle flap.

Usage guide

1. Take the sleeve off, thread the looped end through the eye of your stirrup iron and replace the sleeve.
2. Slide the loop over your stirrup bar.
3. To secure your stirrup iron fold the T-shaped buckle end up, behind your stirrup iron and insert into the I shaped hole at your preferred length. Turn the buckle until your Webber is sitting flat, and the buckle is secure.
4. Pull the sleeve down firmly to ensure the buckle is covered and located below your saddle flap to avoid wear.
5. To run-up your Webbers, remove the T-shaped buckle from the slot they have been secured into for riding and insert the buckle in the hole at the very top. This is up very high near your stirrup bar and you may need to lift the skirt of your saddle to see it. Run the stirrup iron up the front of the Webber and tuck the folded Webber through the stirrup iron and pull down to secure.

We are one of the largest independent retailers of Bates in the UK and a verified premium stockist giving us access to the entire range. Our sales advisors all use these products on a daily basis so are able to offer you expert advice. If you need any assistance in selecting the right item for you or your horse please don't hesitate to contact us.